Let you have a deeper understanding of relevant technical knowledge
Operation procedure of electric bicycle in use
May 13, 2021

1. Install the fully charged battery in the battery slot (rack) and lock it. Insert the power key into the lock hole and rotate it clockwise to the on position. At this time, the power supply is connected with each control line. You can ride by turning the speed control handle (the speed of the electric bicycle is fast. To ensure your safety, please start the motor after the riding is stable, so as to avoid your confusion in the traffic flow and avoid starting in place).

2. During riding, frequent braking and starting should be reduced as far as possible under the condition of ensuring safety; When the uphill slope is large or the wind speed against the wind is too high, please assist with the pedal.

3. After riding, please turn off the power, remove the power key and lock the anti-theft lock to ensure safety.