(1). Because the coordination between the surfaces of the engine parts of the new car is in the stage of adjustment and mutual grinding, the amount of wear is large, and the quality of the running-in quality affects the life of the motorcycle. During the running-in period, please strictly implement the speed limit, load limit, and regular maintenance regulations to reduce the amount of wear on the engine and transmission parts. At the same time, you can also give full play to the performance of your new car and extend the service life of the vehicle.

(2). Change of engine speed During the running-in period, the engine speed should be changed from time to time, and all gears must be run in. The throttle should not be fixed at a certain speed and continue to run. Its purpose is to balance the load of each part. However, the maximum speed specified must not be exceeded.

(3). Avoid running the engine at a low speed for a long time. When the engine is running at a low speed (light load) for a long time, the lubricating oil pressure is low, which is easy to wear parts and cause poor coordination. During the running-in period, various gears can be engaged (the scooter can be appropriately added to the accelerator opening) to accelerate the engine, as long as the specified maximum speed is not exceeded. But within the first 16OO kilometers, the maximum throttle cannot be used.

(4). Before driving, let the engine oil circulate; during the running-in period, the engine should be allowed to have sufficient idle running time (3-5 minutes) to warm up before starting in the hot or cold state Flow to all lubrication parts.

(5). Pay attention to the engine cooling during the running-in period, the vehicle should be used properly when driving time is controlled, to avoid long-term operation, one. Generally every 30 minutes of driving, it should be extinguished for a while to facilitate engine cooling and heat dissipation.

(6). The first maintenance of the vehicle During the running-in period, the first maintenance of the vehicle is very important. The vehicle must complete the first required maintenance items, and replace the oil and oil filter within 1000 kilometers. Ensuring that the first maintenance projects within 1000 kilometers are in place will ensure that your motorcycle will perform at its best performance and extend its service life.

After the introduction of the editor, everyone should know how to repair and maintain the motorcycle.